Programmable multi-channel, low-noise, fully floating DC Power Supplies for applications in scientific research, automated test systems or R&D; the W-IE-NE-R PL500 Series provides up to 16 independent channels of 300 … 600 W power each.
|Image||Name||Type||Max Number of Outputs||height||Width||Max Power||Voltage Range|
|PL506 Power Supply System||PL500||6||3U||19"||3000W||2 to 85V|
|PL508 Power supply System||PL500||10||3-6U||19"||6000W||2 to 85V|
|PL512 Power Supply System||PL500||12||3U||19"||3000W||2 to 85V|
|PL516 Power Supply System||PL500||16||3U||19"||3000W||2 to 85V|
The W-IE-NE-R PL500 is a high density, low noise, floating low voltage power supply system. The PL500-Series has been designed to power lowest noise electronics with medium to high currents (10A to 500A current/channel range) over long distances in voltage or current controlled mode. Operating in either un-sensed or sensed mode the dynamic behavior can be set internally or by software for short, medium or long distances.
Voltages, currents, temperatures and output power are controlled by internal processor and illegal modes as well as failure will be detected.
An alphanumeric monitor for data and diagnostic with programming switch board can be integrated optionally. The unit can be programmed and monitored remotely via Ethernet.