A Phoenix Mecano Company

6U VME64x NIX-I

The low-cost / industry standard VME64x NIX-I series, provides basic, full size VME crates with low noise 6000 series based power supply technology and a removable fan tray.

Optionally remote control via CAN-bus is available.

Main Features

  • 7U VME-Bin with 21 Slots for 6U x 160mm VME64x modules,
  • Plug-in, replaceable low-cost VME fan tray
  • Low noise power supply
  • 7U VME-Bin VM4 with 21 Slots for 6U x 160mm VME64x modules,
  • IEEE 1101.10 compliant mechanics with enhanced EMC / ESD
  • 21 slot J1/J2 VME64x monolithic backplane (J0 optional)
  • Plug-in, replaceable VME fan tray UL 4 with high efficient 3- fold DC fan tray blowers, one unit height, air inlet from bottom, optionally watched by temperature sensors and / or variable fan speed
  • VME-Power-Supply UEP4, low noise VHF switching technology based, up to 650W output power,  rear side mounted (behind J1 area!, no 6U transition possible)
  • Optionally with CAN-bus interface (CAN-bus remote monitoring and controlling).
  • CE-conformity 
  • Dimensions: 19" (482mm)  x 7U (311mm) x 325mm [whd], weight: ca. 11.7 Kg
Crate Version Backplane +5V +3.3V +12V -12V
NIX-I x J1/J2 VME64x 45A 45A 23A 23A
NIX-I xP0 J1/J0/J2 VME64x 45A 45A 23A 23A

 

VME / VME64x NIXI

Module cage formats

6Ux160mm, VME standard


Power Supply

 
Rated mains input range 106- 230VAC ± 15% (90...265VAC)
Rated input current Sinusoidal 16A for suffix H input, 32A for suffix K input
Inrush current: limited to rated input current (cold unit)
Input fuse:

external, intern on special request

Isolation Inp.-outp.: CE EN 60950, ISO 380, VDE 0805, UL 1950, C22.2.950
DC output power: H for 1000... <3000W (92 …265VAC)
  K for 2000... <6000W (92 …265VAC)
 

H input outfitted with removable power cord (3*1,5mm2) for 16A nominal input current,

 

K input (6U power box) is equipped with 2m fixed power cord for up to 32A nominal.

 

Regulation  
static:  MEH  550W/650W <15mV (+/-100% load, +/- full mains range)
MDH (20A) <0,05% (+/-100% load, +/- full mains range)
MDL / MDH <0,1% (+/-100% load, +/- full mains range)
dynamic :  MEH,  MDH <100mV (+/-25% load)
MDL / MDH <0,7% (+/-25% load)
Recovery time :  +/-25% load                      within +-1%    within +-0.1%
Modules 550W  0.2ms     0,5ms,
Modules 650W 0,5ms 1,0ms
MDL / MDH  0.0ms     1.0ms
  (Conditions: Current slope <1000A/ms, 21mF per 100A ^ 1mF per slot)
Sense compensation range: difference between min. and max. output voltage

Available modules

Type Channels Voltage range Peak output / power Noise and ripple
MEH 1 2... 7,0V 115A / 550W 10mVpp,  (0-20MHz ), <2mVrms (0-30MHz
MDH 2 7...16V (+/-) 20A / 250W (500W) <15mVpp,  (0-20MHz ), <2mVrms (0-30MHz)

EMC Compatibility

EMA. EN 61 000-6-3:2001  [RF emission]
  EN 55 022:1998 + Corr:2001 + A1:2000  Class B conducted noise
  EN 55 022:1998+ Corr:2001 + A1:2000  Class B radiated noise
  EN 61 000-3-2:2001 harmonics
  EN 61 000-3-3:1995 +Corr:1997 +A1:2001 flicker
EMB EN 61 000-6-2:2001  [immunity]
  EN 61 000-4-6:1996 + A1:2001 injected HF currents
  EN 61 000-4-3:1996 + A1:1998 + A2:2001 radiated HF fields  incl. ”900MHz”
  EN 61 000-4-4:1995 + A1:2001 Burst
  EN 61 000-4-5:1995 + A1:2001 Surge
  EN 61 000-4-11:1994 + A1:2000 voltage variations
  EN 61 000-4-2:1995 + A1:1998 + A2:2001 ESD

   
Operation temperature:

0… 50°C  ambient without derating,  Storage:-30°C ... +85°C

Temperature coefficient:

< 0,2% / 10K

Stability:

10mV or 0,1%  /  24 hours, 25mV or 0,3%  /   6 month
(under constant conditions)

Current limits: adjustable to any lower level
Voltage rise characteristics: monotonic 50ms, processor controlled.
Overvoltage protection: crow bar protection trip off adjusted to 125% of nominal voltage each output
DC Off (trip off): within 5ms if >5% deviation from adjusted nominal values,
after overload, overheat, overvoltage, undervoltage (bad status),
and fan fail, if temperatures exceed 125°C at heat sinks.
Limits programmable. Outputs discharged by crow bars, when power supply tripped- or switched Off.
Efficiency:

75% ... 85%, depends on used modules 

M F O T (Maintenance Free peration Time):  
internal blowers: 40°C ambient

>65 000 h

  25°C ambient 100 000 h
electronics: 40°C ambient >100 000 h

 

VME64x Backplanes

All WIENER VME 64x multi-layer backplanes are outfitted with 5-row 160 pin connectors for J1 and J2 as well as optionally with 133 pin hard metric connector for J0.  The busses have active on board termination and active automatic daisy-chain (CBLT compatible!). Available with  up to 21 slots.
W-Ie-Ne-R’s special current multilayer made of  “z”-bended copper sheets, further stiffens the 4.8mm thick board.

  • Strip line technology suitable for data rates of 320Mbyte/s (64bit)
  • High power distribution by current multiplayer / bus bar system
  • Excellent RF shielding
  • Optimized filtering (electrolytic and ceramic filter-capacitors)
  • Minimized ground shift and cross talk
  • Automatic daisy chain
  • flat cable connector for sense and control
  • Provision for up to 8 temperature sensors (module temp. checking)
  • Sense circuit protection by PTC- resistors (Optionally)
  • Special version for VIPA (VME in Physics) and CERN VME430 style
Power per slot VME 64x VME 64x-V430 VME64xP
(20°C / 70°C) J1-J0-J2 J1-Jaux-J2 J1-J0-J2
Slot 2- 21
3,3V 17A / 12A 17A / 12A 17A / 12A
5V 15,3A / 10,8A 15,3A / 10,8A 27A / 19A
+/-12V 1,7A / 1,2A 1,7A / 1,2A 1,7A / 1,2A
+/-15V   3,2A / 2,5A  
-5,2V   19A / 15A  
-2V   9,5A / 7,5A  
Vw, Vx, Vy, Vz     4A / 3A
V1, V2 1,7A / 1,2A 1,7A / 1,2A 1,7A / 1,2A
Layers 10 10 18

 

Product Data Sheet  
6U VME64x NIX-I: Print Product Data Sheet

 

Documentation  
Manual and Tech-Notes : NIXI
Introduction in to VME: WIENER_VME_VXI_VXS_introduction

 

Downloads  
SYScontrol : Download
SNMP: Download
OPC-Server: Download
UEP6Control: Download
Firmware UEL: UEL6
  UEL6-Ethernet
Firmware UEP : Download

 

Product Finder

Use our new product finder to locate any item.

Submit