• MPOD Crate
    • MPOD Mini crate
    • MPOD LV Module
    • MPOD HV module
    • PL506
    • PL508
    • PL512
    • MARATON moderate HE
    • MARATON hazardous HE
    • UEP 15
    • UEP22M / CEP22M
    • UEP10M66 / CEP10M66
    • UEP10M88 / CEP10M88
    • UEP10M52 / CEP10M52
    • UEP10M53 / CEP10M53
    • PS236 / CS236
    • UEP6021

NIM Compact slot power supply UEP 15

The UEP 15 is a plug in power supply for use in UEN 04 bin or for powering every non-powered extant NIM bin.  The UEP 15 features all 6 voltages, stabilized by adjustable monolithic voltage regulators.  Outputs are ported using a rear mounted NIM connector with a standard NIM pin out.

An integrated DC blower provides perfect cooling of the unit to avoid overheating.  Voltage regulators and transformer are protected against over temperature.  Unique design of Over/Under voltage discriminator, maintains proper output regulation within +/- 3% of nominal voltages.  Should the voltage fall out of this range the mains relay shuts down the power supply with a, "Bad Status", (red LED indicator on front panel). 

Optional CAN-bus interface for DC voltage monitoring and remote on/off via rear 9 pin sub-D connector.

Technical Details

Dimensions:

width 2 1/2 NIM, height 183 mm, depth 249 mm

Weight:

7.5 kg

Mains Input :

100 / 115 / 210 / 240 VAC (+-10%), 48 - 63 Hz, internal taps

 

soft start circuit, mains filter, fuse protection

Isolation:

input-output CE; EN60950, ISO 380, VDE 0805, UL1950, C22.2.950

Derating:

continuous full power at 40°C, derating 2 %/K up to 60°C

Regulation:

load 10 to 100%

< 0.2% for 6V, <0.1% for 12V / 24V

line +/-10%

Uout < 0.02%

Recovery time :

load change 10 % to 100%:    < 0.15ms

Output impedance:

static

< 1.5 mOhm

dynamic

< 0.5 Ohm

Noise and ripple:

+/-6V: 3mVpp,  +/-12V: 5mVpp,  +/-24V: 10mVpp

Temperature error:

< 2 ×10-4 /K

Thermal protection:

overheating protection by thermal switches for each regulator and for transformer

Current characteristics:

current limits fixed
constant current in overcurrent mode
reverse bias diodes.

Voltage characteristics:

calibration range +/- 5 % rated voltage,
adjustment points behind left side panel
over and undervoltage protection for all outputs (+/- 0.3%)

Standard power supply versions (other possible on request)

Power
+6V / -6V
+12V / -12V
+24V / 24V
115VAC
Type / Power
UEP 15
5A / 5A
3A / 3A
1.5A / 1.5A
0.25A
Linear / 150W
UEP 15 as
5A / 5A
3A / 3A
3A / 0.5A
0.25A
Linear / 150W

 

 UEP 15 power supply

 

 

        
copyright 2004 W-IE-NE-R Plein & Baus GmbH  sitemap   home