The UEP 10M53 series is a UEP10M variation with a maximum current output on -6V (asymmetric) and without +/-12V for use in CERN type CAMAC crates with a maximum 650W power output.
The power supply has all the standard features of the UEP10 family as high precision and lowest noise DC outputs and a cut-off protection for overload, over- / and undervoltage and overtemperature failures. The high power density and excellent electrical characteristics are achieved by the "Energy tank technology", a special filter and storage capacitor bank assembly with low internal resistance and non inductive bonding.
The power supply is outfitted with alarming and monitoring facilities according to CERN CAMAC Note 46-04. The signals are wired on the control- and monitoring connector (15-pin sub-D / PG 27+28) and provide a status output ("good" when all DC-voltages within tolerance level), rearming input, power fail signal as well as alarms for overload and overtemperature, voltage and current monitor outputs.
The CEP10M52 is the CE conform version with separate AC wiring.
MPOD - LV/HV
NIM / CAMAC PS
