6U VME64x 195-X Mini crate series

VME 195-x Features

• VME-MINI-Bin mechanics for 6U 160mm  VME modules, suitable either for 19" racks, as tower- or desktop box . Ruggedized design
• 9 slot monolithic backplanes VME/VME64  (7 slot on request)
• Free rear access for 6U transition modules, standard transition cage for 6U 160mm modules, provisions for 80 and 120mm foreseen. Special depth on request
• Front and rear cover / screen for module space, cable duct between front- and rear-side  of the module cages with  space for one or more 2,5" hard-disks
• micro-processor controlled with alphanumeric high-visibility LED display, 4 status LED’s
• Efficient DC blower inside, adjustable speed (1200 … 3200 RPM,) temperature watched and controlled
• adjustable “after-running” of fans to provide cooling after power off
• integrated fan and thermal monitoring ( 8 temperature sensor ports, 5 ports free for custom applications) with temperature display (C/K), programmable over temperature protection settings
• with Ethernet / CAN-bus combo interface  for crate remote monitoring and control
• build-in Power-Supply designed in low noise VHF switching technology, noise and ripple typically less than 10mV(pp) or 3mV(rms)
• up to six different output voltages at 650W/>100VAC output power. For special configurations up to 1000W , world wide range AC-input
• CE-conformity
  

Technical Details

Module cage formats	Type 195: 6U / 160mm, VME standard, Transition 6U / 160mm  (Type 175 recently with 7 slot VME 64x)
Crate Size	7 Slot, 19" or 446mm x 5U (221mm) x 485mm depth Tower: 446mm height / Desktop: 446mm width (height + rubber feet)
Mains input	auto range, 90...265VAC, 47-63Hz, 1 x 10A slow blow fuse
inrush current: input current:	limited by cold-start-circuit, max. 20A CE acc. to EN 61000-3-2, IEC 555 power. fact. 0,95 (230VAC)
Isolation Inp.-outp.	CE acc. to EN 60950, ISO 380, VDE 0805, UL 1950, C22.2.950
Regulation static:	0%...100% load, +/-15% mains <15mV
Regulation dynamic:	+/-25% load <100mV
Recovery time:	+/-25% load within +-1% : 1.0ms / within +-0.1% : 0.2ms
Noise and ripple:	< 15mVpp, typical <10mVpp (0-20MHz ), 3mVrms (0-2MHz)
EMC compatibility:   EMA (RF emission) CE	EN 61 000-6-3:2001 EN 55 022:1998 + Corr:2001 + A1:2000 Class B EN 55 022:1998 + Corr:2001 + A1:2000 Class B EN 61 000-3-2:2001 EN 61 000-3-3:1995 +Corr:1997 +A1:2001
EMB (RF immunity) CE	EN 61 000-6-2:2001 EN 61 000-4-6:1996 + A1:2001 EN 61 000-4-3:1996 + A1:1998 + A2:2001 EN 61 000-4-4:1995 + A1:2001 EN 61 000-4-5:1995 + A1:2001 EN 61 000-4-11:1994 + A1:2000 EN 61 000-4-2:1995 + A1:1998 + A2:2001
Operation:	0...40°C without derating, rel. humidity 30...80%, non condensing atmospheric pressure 70...110kPa, >85kPa for 600W continuous power, Storage: -30°C up to 85°C
Temperature coefficient:	< 0,2% / 10K
Stability:	10mV or 0,1% within 24 hours 50mV or 1,0% within 6 months
Current limits:	programmable!
Overvoltage protection:	trip off adjusted to 125% of nominal voltage each output
DC Off (trip off):	within 5ms if +5%, -2,5% deviation from adjusted nominal values, after overload, overheat, over voltage, under voltage (bad status) and fan fail trip off voltages and currents adjustable, processor controlled
Internal temperature limits:	Cut off: 110°C heat sink, 70°C ambient, automaically selecting maximum fan speed if air above VME modules >45°C
Efficiency:	ca. 80%
Cooling Airflow:	340 m³/h (at maximum fan speed)
M T B F:	Blower:  >35 000 h (40°C), >65 000 h (25°C) Electronics:  >85 000 h (40°C ambient temperature)