The WIENER PL500 is a high density, low noise, floating low voltage power supply system. The PL500-Series has been designed  to power lowest noise electronics with medium to high currents (10A to 500A current range) over long distances in sensed mode. Dynamic behavior is foreseen to set internally for short or long sensed distances. Voltages, currents, temperatures and output power are controlled by internal processor and illegal modes as well as failure will be detected. An alphanumeric monitor for data and diagnostic with programming switch board can be integrated optionally. The unit can be programmed and monitored remotely via CANbus (PL508) and TCP/IP (PL508/PL512). 8-channel versions (PL 508, similar to  former PL 500F8) and 12-channel versions (PL 512, similar to formerr PL 500F12) available.